Polisher Service Kit Carb. Brush Pair (36) For My3015-2

Extra Information

• Only suitable for the Tork Craft MY3015-2 polisher – always confirm the model number on the rating plate.
• It is recommended to replace both brushes at the same time, even if only one appears worn.
• After fitting new brushes, allow the machine to run at no-load for a short period to bed the brushes in on the commutator.

Features

• Genuine Tork Craft spare part carbon brush pair for the MY3015-2 polisher / burnishing machine.
• Correct brush size and shape to suit the original brush holders and commutator.
• Paired set of two brushes so both sides of the armature can be replaced together for balanced wear.
• Flexible leads and proper terminations for secure electrical connection and easy installation.

Benefits

• Restore motor performance: new brushes help bring back lost power and smoother running.
• Reduce sparking and heat: good brush contact lowers arcing, which can protect the armature and stator.
• Low-cost maintenance: replacing brushes is one of the simplest, most economical ways to extend tool life.

Safety

• Always disconnect the machine from the mains and allow it to cool before opening the brush covers.
• Ensure brushes slide freely in the holders and that springs are seated correctly before reassembling.
• Refit all brush caps and covers securely before operating the tool.
• If you are not confident working on electric tools, have the MY3015-2-SK10 brush kit fitted by a qualified technician.

Specifications