Menu
Your Cart

Tork Craft NR5012-01 Replacement Inserts M12 X 1.75 X 12mm 1d 10pc

Tork Craft NR5012-01 Replacement Inserts M12 X 1.75 X 12mm 1d 10pc
Tork Craft NR5012-01 Replacement Inserts M12 X 1.75 X 12mm 1d 10pc
Based on 0 reviews. - Write a review
Price
R 92.46
Ex VAT: R 80.40
  • Stock: In Stock
  • Cat No: NR5012-01
  • Weight: 0.04kg
  • Dimensions: 117.00mm x 98.00mm x 21.00mm
  • SKU: NR5012-01
  • Barcode: 6009515859527

Available Options

Ask Question Ask Question
Stockists

Tork Craft NR5012-01 Replacement Inserts M12 X 1.75 X 12mm 1D 10pc

At a Glance: 10 replacement stainless steel M12 x 1.75mm thread inserts, 12mm long, for the Tork Craft NR5012 internal thread repair kit.

The Tork Craft NR5012-01 Replacement Inserts are designed for use with the Tork Craft NR5012 M12 x 1.75 internal thread repair kit. These inserts are used to restore damaged, stripped or worn internal M12 threads, allowing the original M12 x 1.75mm bolt size to be used again after repair.

Manufactured from stainless steel, these replacement inserts provide a durable new internal thread surface once installed into the prepared and tapped hole. The 1D insert length gives a 12mm long insert, making it suitable for shallower M12 thread repairs where the full 1.5D or 2D insert depth is not required.

Replacement insert pack for the NR5012 thread repair kit

This pack contains 10 replacement inserts for ongoing thread repair work. It is ideal for workshops, automotive maintenance, construction repairs, DIY users and general engineering applications where damaged M12 x 1.75mm internal threads need to be repaired cleanly and reliably.

Product highlights

  • 10 piece insert pack Supplied with 10 replacement thread inserts for multiple repairs.
  • M12 x 1.75mm size Designed for repairing M12 internal threads with a 1.75mm pitch.
  • 1D insert length 12mm insert length for shallower M12 thread repair applications.
  • Stainless steel construction Provides a durable repaired thread surface inside the prepared hole.
  • For NR5012 repair kit Made as replacement inserts for the Tork Craft NR5012 internal thread repair kit.
  • Carded blister packaging Supplied on a hanging card for easy storage, display and identification.

Extra Information

  • NR5012-01 is the 1D replacement insert pack for the Tork Craft NR5012 M12 x 1.75mm internal thread repair kit.
  • 1D means the insert length is equal to one times the thread diameter. For M12, this gives an insert length of approximately 12mm.
  • These inserts are used only after the damaged hole has been correctly drilled and tapped with the correct repair tools.
  • The inserts are for internal thread repair and are not used for cutting new external threads.
  • Other compatible replacement insert lengths for the NR5012 kit include NR5012-02 at 18mm (1.5D) and NR5012-03 at 24mm (2D).

Pro Tips

  • Select the insert length according to the depth of the repair. Use the 12mm 1D insert where the threaded hole is shallower or where a shorter repair is preferred.
  • Always clean the tapped hole before inserting the replacement insert. Swarf or dirt can stop the insert from seating correctly.
  • Install the insert carefully with the correct installation tool from the NR5012 kit to avoid damaging the insert during fitting.
  • The insert should be positioned slightly below the surface when required, allowing the bolt to seat cleanly.
  • After installation, break off and remove the tang before inserting the bolt.

How to Use

  • Confirm that the damaged internal thread is M12 x 1.75mm and that a 12mm 1D insert is the correct length for the repair.
  • Use the correct drill and STI tap from the NR5012 thread repair kit to prepare the damaged hole.
  • Clean the newly tapped hole thoroughly to remove swarf, chips and loose material.
  • Fit the replacement insert onto the installation tool from the NR5012 kit.
  • Wind the insert into the tapped hole using the installation tool until it is positioned correctly.
  • Use the break tool to snap off the insert tang.
  • Check the repaired thread by carefully fitting the correct M12 x 1.75mm bolt by hand before final assembly.

Features

  • Replacement thread inserts Designed to replace used inserts from the NR5012 thread repair kit.
  • Metric internal thread repair Suitable for M12 x 1.75mm internal thread repairs.
  • Short 1D length 12mm insert length is useful where the repair depth is limited.
  • Stainless steel inserts Helps create a strong and wear-resistant replacement thread.
  • Workshop-ready pack Convenient 10 piece pack for repeat thread repair jobs.

Benefits

  • Extends the use of the repair kit: Keeps the NR5012 kit ready for additional repairs once the original inserts have been used.
  • Restores the original bolt size: The repaired thread accepts the original M12 x 1.75mm fastener size.
  • Helps save damaged components: Allows worn or stripped threaded holes to be repaired instead of replacing the full part.
  • Ideal for shallow repairs: The 12mm insert length is useful when a shorter repair depth is required.
  • Reliable repair finish: The stainless steel insert creates a durable internal thread once correctly installed.

Application

  • Replacement inserts for the Tork Craft NR5012 internal thread repair kit.
  • Repairing damaged M12 x 1.75mm internal threads.
  • Restoring stripped, worn or over-used threaded holes.
  • Automotive repair and maintenance work.
  • Construction, DIY, workshop and general engineering applications.

Safety

  • Always use the correct tool for the job.
  • Using any tool can be dangerous when incorrect procedures are followed.
  • Wear eye protection when drilling, tapping and breaking off the insert tang.
  • Run the drill bit at the correct RPM for the drill diameter and material being drilled.
  • Use suitable tapping fluid during the tapping process.
  • Ensure the drill bit and tap are clean and in good condition before use.
  • Clamp or secure the workpiece before drilling or tapping.
  • Keep hands clear of sharp swarf, drill flutes, tap edges and repaired threads.
  • Follow all safety procedures and instructions shown on the product, packaging or manual for optimal performance.

Specifications

Description Spec
BrandTork Craft
Cat No.NR5012-01
Barcode6009515859527
Product TypeReplacement Thread Inserts
Product DescriptionThread Repair Kit M12 X 1.75 X 12mm (1D) Replacement Inserts For NR5012
Thread TypeInternal Thread Repair
Thread SizeM12
Thread Pitch1.75mm
Insert Length12mm
Insert Length Ratio1D
Insert MaterialStainless Steel
Quantity10pc
Compatible KitNR5012
Product ClassificationStandard Yellow
Packaging TypeHanging Card / Blister
Sales UnitEach
Related Insert PacksNR5012-02, NR5012-03

In the box / Packaging:

  • 10pc Replacement Inserts M12 X 1.75 X 12mm (1D)
  • Supplied in hanging card / blister packaging
Tags: Thread Repair , NR5012-01 , Replacement Inserts , M12 Thread Inserts , M12 X 1.75 , 12mm Inserts , 1D Inserts , Internal Thread Repair