Menu
Your Cart

High Speed Wire End Brush 24mm x 6mm Shaft Max 20000 RPM

High Speed Wire End Brush 24mm x 6mm Shaft Max 20000 RPM
High Speed Wire End Brush 24mm x 6mm Shaft Max 20000 RPM
Price
R 78.20
Ex VAT: R 68.00
  • Stock: In Stock
  • Cat No: TCWE2406HS
  • Weight: 0.08kg
  • Dimensions: 68 mm x 112 mm x 112 mm
  • SKU: TCWE2406HS
  • Barcode: 6009515835743

Available Options

Tork Craft High Speed Wire End Brush 24mm x 6mm Shaft For Die Grinder Max 20000 RPM

At a Glance: High-speed wire end brush for use with a compatible die grinder, featuring a 24mm minimum brush diameter, up to 30mm maximum working diameter, 6mm shaft and an exceptionally high maximum operating speed of 20000 RPM

The Tork Craft TCWE2406HS High Speed Wire End Brush is designed specifically for high-speed rotary cleaning with a compatible die grinder. Its compact end-brush profile concentrates the wire bristles into a small working area, making it ideal for removing rust, corrosion, scale and surface contamination from recesses, corners, internal areas and other difficult-to-reach locations. The brush has a 24mm minimum diameter, can expand during operation to approximately 30mm maximum diameter and features a 6mm shaft for fitting into a compatible die grinder collet or chuck. With a maximum operating speed of 20000 RPM, this high-speed version is intended for applications requiring substantially higher rotational speed than standard drill-mounted wire end brushes.

High-speed wire end brush for die grinder use – maximum 20000 RPM

The TCWE2406HS is specifically designed for high-speed rotary cleaning applications with a compatible die grinder. The compact end-brush shape provides concentrated cleaning action in detailed and confined areas, while the 24mm minimum brush diameter can expand to approximately 30mm during operation. Always ensure the operating speed does not exceed the rated maximum of 20000 RPM.

Product highlights

  • High-speed die grinder brush Designed for use with compatible high-speed die grinders.
  • Maximum 20000 RPM High-speed rating for demanding rotary cleaning applications.
  • 24mm minimum brush diameter Compact profile for concentrated and detailed cleaning.
  • Up to 30mm maximum brush diameter Allows for normal outward bristle expansion during operation.
  • 6mm shaft Suitable for compatible die grinder collets or chucks.
  • End brush profile Ideal for recesses, corners, holes and difficult-to-reach areas.
  • High-speed alternative Suitable where a standard low-speed drill wire brush does not provide the required operating speed.

Features

  • High-speed wire end brush Designed for rotary cleaning with compatible die grinders.
  • 24mm minimum brush diameter Provides a concentrated working area for detailed applications.
  • 30mm maximum brush diameter Allows for normal bristle expansion while operating.
  • 6mm shaft Suitable for compatible high-speed rotary tools with the correct holding capacity.
  • 20000 RPM maximum speed Rated for high-speed operation within this limit.
  • End brush design Helps reach confined and recessed working areas.
  • Compact working profile Useful for precision cleaning and targeted surface preparation.

Benefits

  • High-speed cleaning: The 20000 RPM rating makes the brush suitable for compatible die grinder applications.
  • Effective rust removal: Wire bristles help remove loose rust, corrosion, scale and surface deposits.
  • Access difficult areas: The end-brush shape reaches locations where larger wheel or cup brushes may not fit.
  • Controlled detail work: The compact brush profile concentrates the cleaning action onto smaller areas.
  • Convenient mounting: The 6mm shaft is designed for secure fitting in a compatible die grinder collet or chuck.

Application

  • For use with compatible high-speed die grinders
  • Removing loose rust and corrosion
  • Cleaning metal surfaces and components
  • Removing scale, oxidation and surface deposits
  • Cleaning recesses, corners and confined areas
  • Surface preparation before coating, painting or finishing
  • Workshop, automotive, maintenance, fabrication and restoration applications

Extra Information

  • IMPORTANT: Maximum operating speed is 20000 RPM.
  • This is the high-speed version intended for use with a suitable die grinder.
  • Always confirm that the die grinder and collet are compatible with the 6mm shaft.
  • The brush has a minimum diameter of 24mm and may expand up to approximately 30mm during operation.
  • Allow the wire tips to perform the cleaning action rather than forcing the brush against the surface.
  • Check the die grinder speed setting before starting work and never exceed 20000 RPM.
  • Wire brushes are consumable accessories and will gradually wear during normal operation.

Pro Tips

  • Start at a lower speed where possible and increase gradually while remaining below 20000 RPM.
  • Use light, controlled pressure; high rotational speed means excessive force is normally unnecessary.
  • Let the wire tips perform the cleaning action rather than pressing the entire brush heavily into the workpiece.
  • Keep the brush moving when cleaning larger areas to help achieve a more even surface.
  • Inspect the brush before every use and replace it if wires are excessively worn, damaged or loose.

How to Use

  • Disconnect or switch off the die grinder before fitting the brush.
  • Confirm that the tool can securely accept the 6mm shaft.
  • Insert the shaft fully into the compatible collet or chuck.
  • Tighten the collet or chuck securely around the shaft.
  • Confirm that the operating speed will not exceed 20000 RPM.
  • Wear suitable eye, face and hand protection before starting work.
  • Start the die grinder away from the workpiece and allow the brush to reach operating speed.
  • Bring the wire brush gently into contact with the surface.
  • Use light pressure and allow the wire tips to perform the cleaning action.
  • Switch off the tool and allow the brush to stop completely before setting it down.

Safety

  • Never exceed the maximum rated speed of 20000 RPM.
  • Wear approved eye and full face protection because wire fragments and debris may be ejected at high speed.
  • Wear suitable protective gloves and clothing.
  • Only use the brush with a compatible die grinder capable of securely holding the 6mm shaft.
  • Inspect the brush before every use and do not use it if the wires, body or shaft are damaged.
  • Make sure the 6mm shaft is securely clamped before operating the die grinder.
  • Keep bystanders away from the working area while the brush is rotating.
  • Do not apply excessive pressure; allow the wire tips and rotational speed to perform the cleaning action.
  • Allow the brush to stop completely before touching it or setting the tool down.

Specifications

Description Spec
Brand Tork Craft
Cat No. TCWE2406HS
Product Type High Speed Wire End Brush
Brush Minimum Diameter 24mm
Brush Maximum Diameter 30mm
Shank Diameter 6mm
Maximum Speed 20000 RPM
Recommended Tool Compatible Die Grinder
Speed Classification High Speed
Application High-Speed Cleaning, Rust Removal And Surface Preparation
Tool Type Rotary Wire Brush Accessory
Primary Use Targeted High-Speed Rotary Surface Cleaning
Applications Workshop, Automotive, Maintenance, Restoration And Fabrication Use
Suitable For Compatible Die Grinders With 6mm Shank Capacity

In the box:

  • 1 x Tork Craft High Speed Wire End Brush 24mm x 6mm Shaft