Rotary Hammer 800w Sds Tcrh0800 C/w 5pc Sds Drill Bit Set X 3 Nr07305

Extra Information

• Use the rotary hammer with SDS-plus masonry bits when drilling into concrete, brick, block and stone.
• The included NR07305 bit sets cover popular diameters typically used with common wall plugs and mechanical anchors.
• Switch to rotary-only mode (if available on the tool) when drilling through softer materials where hammer action is not required.
• For neat fixings, always match the bit size to the wall plug or anchor manufacturer’s recommendation.

Features

• 800W rotary hammer TCRH0800 High-torque 800W motor designed for impact drilling into concrete, brick and stone with SDS-plus bits.
• SDS-plus chuck system Quick, tool-free bit changes with positive engagement for better power transfer and reduced bit slip.
• Impact drilling mode Hammer action helps the bit bite into tough masonry, making anchor holes faster and easier to drill.
• Variable speed trigger Lets you start holes gently and then pick up speed for efficient drilling through the material.
• Auxiliary side handle and depth stop Adjustable side handle and depth rod for better control and consistent hole depth.
• 3 x NR07305 5-piece SDS drill bit sets Three packs of SDS-plus masonry bits in useful sizes for common wall plugs and anchors.

Benefits

• Ready for masonry work: Machine and SDS-plus bits are supplied together, so you can start drilling straight away.
• Faster drilling in hard materials: Hammer action and SDS-plus drive help you drill concrete and brick much quicker than a standard drill.
• Less bit changing hassle: Push-in SDS-plus chuck makes it quick to swap sizes as you move between different fixings.
• Good value kit: Including three 5-piece SDS bit sets gives you a solid stock of the sizes you use most, saving repeat trips for consumables.
• Ideal for installation work: Perfect for plugs, anchors, brackets, trunking, shelves and general building and renovation tasks.

Safety

• Wear eye, ear and dust protection when drilling into masonry and concrete.
• Check that the SDS-plus bit is fully locked into the chuck before starting the machine.
• Hold the tool firmly with both hands and keep a stable stance, especially when drilling overhead or into very hard material.
• Do not force the bit; allow the hammer action to do the work and back off if the bit starts to bind.
• Disconnect the tool from the power source before changing bits or making adjustments.

Specifications