Rot. Hammer Tcrh0800 With Sds-plus Set Alp Mb 5

Extra Information

• Use the Alpen MB-5 SDS-plus bits for drilling anchor and plug holes in concrete, brick, block and similar masonry materials.
• The SDS-plus chuck is designed specifically for hammer drilling, reducing bit slip and improving drilling efficiency.
• Set the depth stop to the plug or anchor length so holes are consistent and fasteners seat correctly.
• Ideal for electricians, plumbers, shopfitters and DIY enthusiasts who regularly drill into walls and slabs for fixings.

Features

• 800W rotary hammer TCRH0800 High-power motor designed for impact drilling in concrete, brick and stone with SDS-plus bits.
• SDS-plus chuck Push-in, pull-out SDS-plus system for fast bit changes and secure power transfer under hammer load.
• Impact drilling mode Hammer action helps the bit chip through tough masonry quickly and efficiently.
• Variable speed trigger Allows gentle starting and controlled speed to suit bit size and material hardness.
• Auxiliary handle and depth stop Adjustable side handle and depth rod for better grip and repeatable hole depth.
• Alpen MB-5 SDS-plus drill set Quality SDS-plus masonry bits in useful sizes for common wall plugs and anchors.

Benefits

• Ready for masonry work: Machine and bit set supplied together so you can start drilling into concrete and brick straight away.
• Faster anchor holes: Dedicated rotary hammer with SDS-plus drive drills far quicker and with less effort than a standard impact drill.
• Less downtime: Quick SDS-plus bit changes let you move between hole sizes without struggling with a keyed chuck.
• Ideal for installations: Perfect for plugs, anchors, brackets, trunking, conduit, shelving and general building fixings.
• Good value combo: Bundling the rotary hammer with an Alpen SDS-plus set offers strong value compared with buying items separately.

Safety

• Wear eye, ear and dust protection when drilling into masonry and concrete.
• Check that the SDS-plus bit is fully locked in the chuck before starting the machine.
• Hold the tool firmly with both hands and keep a stable stance, especially when drilling overhead or into very hard materials.
• Do not force the drill; let the hammer action and bit do the work, backing off if the bit starts to bind.
• Disconnect the tool from the power source before changing bits, adjusting the depth stop or performing any maintenance.

Specifications