Cat No: TCDP22000
Stock: In Stock
TorkCraft - Dry Use Diamond Polishing Pad
Grit: #2000
Application:
The Tork Craft Dry use diamond polish pads 100mm ..
R 274.85
Ex VAT:R 239.00
Cat No: TCDS25080
Stock: In Stock
25.4mm drum sanding sleeves
Drum sanding sleeves to use with drum sanding
arbor.[click
here]
SIZE: Ø 25.4mm
GRIT: P80
....
R 57.04
Ex VAT:R 49.60
Cat No: TCFA0205
Stock: In Stock
Face off disc
Designed
to remove paint, rust and other materials, while hardly affecting the underlying
surface.
SIZE: Ø50mm
....
R 326.60
Ex VAT:R 284.00
Cat No: TCFA0706
Stock: In Stock
Tork Craft Face Off Disc and Arbor 100mm for Drill
At a Glance: 100mm face off disc supplied with arbor for compatible drills, carded and rated for a..
R 230.00
Ex VAT:R 200.00
Cat No: TCFD115-2-120
Stock: In Stock
Flap disc
A flap disc is an abrasive tool made to fit onto an angle grinder to grind and
finish in one operation.
SIZE: Ø115
GRIT....
R 30.13
Ex VAT:R 26.20
Cat No: TCFD115-2-60
Stock: Out Of Stock
Flap disc
A flap disc is an abrasive tool made to fit onto an angle grinder to grind and
finish in one operation.
SIZE: Ø115
GRIT....
R 30.13
Ex VAT:R 26.20
Cat No: TCFD115-3-60
Stock: In Stock
Flap disc
A flap disc is an abrasive tool made to fit onto an angle grinder to grind and
finish in one operation.
SIZE: Ø115
GRIT....
R 38.87
Ex VAT:R 33.80
Cat No: TCFD115-3-80
Stock: In Stock
Flap disc
A flap disc is an abrasive tool made to fit onto an angle grinder to grind and
finish in one operation.
SIZE: Ø115
GRIT....
R 38.87
Ex VAT:R 33.80
Cat No: TCFD115-40
Stock: Out Of Stock
Flap disc
A flap disc is an abrasive tool made to fit onto an angle grinder to grind and
finish in one operation.
SIZE: Ø115
GRIT....
R 27.60
Ex VAT:R 24.00
Cat No: TCFD180-2-40
Stock: In Stock
Flap disc
A flap disc is an abrasive tool made to fit onto an angle grinder to grind and
finish in one operation.
SIZE: Ø180
GRIT....
R 90.62
Ex VAT:R 78.80
Cat No: TCFD180-2-80
Stock: In Stock
Flap disc
A flap disc is an abrasive tool made to fit onto an angle grinder to grind and
finish in one operation.
SIZE: Ø180
GRIT....
R 90.62
Ex VAT:R 78.80
Cat No: TCFD180-4-80
Stock: In Stock
Flap disc
A flap disc is an abrasive tool made to fit onto an angle grinder to grind and
finish in one operation.
SIZE: Ø180
GRIT: P80
..
R 103.96
Ex VAT:R 90.40
Cat No: TCFD230-40
Stock: Out Of Stock
Tork Craft Flap Sanding Disc — 230 mm × 40 Grit (Aluminium Oxide)
Size: 230 mm diameter
This 230 mm Tork Craft flap sanding disc with 40-grit Alumin..
R 168.48
Ex VAT:R 146.50
Cat No: TCFS200
Stock: In Stock
Flexible shaft bit holder
For
bit:
1/4" Hex
Shank: 1/4" Hex male
Length: 200mm
Application:
The bit holder is flexible and it is used ..
R 114.31
Ex VAT:R 99.40
Cat No: TCGR100-1
Stock: In Stock
Tork Craft Grinding Wheel — 100 × 50 mm, M14 Bore, #36 Bowl (Angle Grinder)
Size: 100 mm diameter × 50 mm thickness [Bore: M14] — Grit: #36 (coarse)
..
R 208.15
Ex VAT:R 181.00
Cat No: TCGR110-1
Stock: In Stock
Tork Craft Grinding Wheel — 110 mm × 58 mm, M22 Bore, #36 Bowl
Size: 110 mm diameter × 58 mm thickness [Bore: M22] — Grit: #36 (Coarse)
This Tork Cr..
R 170.78
Ex VAT:R 148.50
Cat No: TCGR150-12
Stock: In Stock
Grinding wheel for bench grinder
For use with bench grinders to grind all tempered and hardened steel.
DIAMETER: Ø150mm
WIDT..
R 172.50
Ex VAT:R 150.00
Cat No: TCGR150-3
Stock: In Stock
Grinding wheel for bench grinder
For use with bench grinders to grind steel
DIAMETER: Ø150mm
WIDTH: 25mm
BORE: Ø32m....
R 172.50
Ex VAT:R 150.00
Cat No: TCGR150-5
Stock: In Stock
Grinding wheel for bench grinder
For use with bench grinders to grind all tempered and hardened steel.
DIAMETER: Ø150mm
WIDT..
R 172.50
Ex VAT:R 150.00
Cat No: TCGR200-4
Stock: In Stock
Grinding wheel for bench grinder
For use with bench grinders to grind steel
DIAMETER: Ø200mm
WIDTH: 25mm
BORE: Ø32m....
R 308.78
Ex VAT:R 268.50
Cat No: TCGR200-5
Stock: In Stock
Grinding wheel for bench grinder
For use with bench grinders to grind all tempered and hardened steel.
DIAMETER: Ø200mm
WIDT..
R 308.78
Ex VAT:R 268.50
Cat No: TCMG6002
Stock: In Stock
Magnetic Multi-Angle Welding Holder
Pull Force: 22.7kg
Weight: 563g
Angles: 45°, 90° & 135°
A magn....
R 143.75
Ex VAT:R 125.00
Cat No: TCMG6003
Stock: Out Of Stock
Magnetic Multi-Angle Welding Holder
Pull Force: 34kg
Weight: 1.03kg
Angles: 45°, 90° & 135°
A magn....
R 208.15
Ex VAT:R 181.00
Cat No: TCMT001DC
Stock: In Stock
Chuck for TCMT001 rotary tool
Application:
The chuck is used to replace the collet clamping system of the TCMT001 rotary
tool. The clamping rang..
R 150.08
Ex VAT:R 130.50
Cat No: TCMT001SS
Stock: In Stock
Telescopic stand for TCMT001 rotary tool
Application:
The telescopic hanging hook stand is fitted to a desk clamp and it can be
adjusted i....
R 394.45
Ex VAT:R 343.00