Cat No: TCYC01401
Stock: In Stock
Tork Craft SDS-+ Chisel Set 3pce (14 mm .ed, 20 mm Flat, 40 mm Flat)
At a Glance: Heavy-duty 3 piece SDS-+ chisel set for concrete and masonry chip..
R 236.96
Ex VAT:R 206.05
Cat No: TNS201
Stock: In Stock
Tork Craft Nutsetter 6 mm × 100 mm (Bulk)
At a Glance: 6 mm hex-nutsetter bit, 100 mm long — for fast, efficient fastening of nuts and bolts with d..
R 57.44
Ex VAT:R 49.95
Cat No: TNS202
Stock: In Stock
Tork Craft Nutsetter 8 mm × 100 mm (Bulk)
At a Glance: 8 mm hex-nutsetter bit, 100 mm long — for fast, efficient fastening of nuts and bolts with d..
R 66.70
Ex VAT:R 58.00
Cat No: TNS203
Stock: In Stock
Tork Craft Nutsetter 10 mm × 100 mm (Bulk)
At a Glance: 10 mm hex-nutsetter bit, 100 mm long — for fast, efficient fastening of nuts and bolts with..
R 72.45
Ex VAT:R 63.00
Cat No: TNS206100C
Stock: In Stock
Tork Craft Magnetic Nutsetter 6 mm × 100 mm
At a Glance: Magnetic 6 mm hex nutsetter bit, 100 mm long — for fast, reliable fastening of nuts and bo..
R 62.10
Ex VAT:R 54.00
Cat No: TNS207
Stock: In Stock
Tork Craft Nutsetter 5/16″ × 100 mm
At a Glance: 5/16″ hex nutsetter bit with 100 mm shaft — designed for quick, reliable fastening of hex-head scr..
R 63.25
Ex VAT:R 55.00
Cat No: TNS2516100C
Stock: In Stock
Tork Craft Nutsetter Magnetic 5/16' x 100mm 1/Card
At a Glance: 5/16' magnetic nutsetter with 100mm long-reach shaft
The Tork Craft Nutsetter Magn..
R 71.30
Ex VAT:R 62.00
Cat No: TTP302510
Stock: In Stock
Tork Craft Torx Tamper Proof T30 X 25mm 10mm Hex Shank Bit
At a Glance; T30 tamper-proof Torx, 25mm insert bit with 10mm hex shank
The Tor..
R 27.49
Ex VAT:R 23.90
Cat No: TZ AC26
Stock: In Stock
Tork Craft Screw Pilot/Countersink Set 4pce
At a Glance; One-step pilot drilling and countersinking for 4 common screw sizes
The Tork Craf..
R 596.22
Ex VAT:R 518.45
Cat No: TZ AC26-02
Stock: In Stock
Tork Craft Allen Key For AC26 Screw Pilot
At a Glance; Replacement hex key for TZ-AC26 screw pilot/countersink set
The Tork Craft Allen Ke..
R 5.81
Ex VAT:R 5.05
Cat No: TZ AC26-10-12
Stock: In Stock
Screw Pilot
90° Countersink
with drill bit
A convenient power tool accessory. Allows you to drill a hole and simultaneously
countersink the ..
R 209.42
Ex VAT:R 182.10
In Stock Soon
Cat No: TZ AC26-6
Stock: In Stock Soon
Screw Pilot
90° Countersink
with drill bit
A convenient power tool accessory. Allows you to drill a hole and simultaneously
countersink the ..
R 171.24
Ex VAT:R 148.90
New Expected Date :
- 15/01/2026
Cat No: TZ MR35
Stock: In Stock
Tork Craft Knife Sharpener With Tungsten Sharpening Edge
At a Glance; Handheld knife sharpener with hard-wearing tungsten edge
The Tork Cr..
R 186.24
Ex VAT:R 161.95
In Stock Soon
Cat No: W60010
Stock: In Stock Soon
Plug cutters
A
plug cutter is used to make a timber plug to hide a drilled hole.
INSIDE DIAMETER: &O/;10mm
MATERIAL: Hardened steel with a sh..
R 526.76
Ex VAT:R 458.05
New Expected Date :
- 15/03/2026
Cat No: W60012
Stock: In Stock
Plug cutters
A
plug cutter is used to make a timber plug to hide a drilled hole.
INSIDE DIAMETER: &O/;12mm
MATERIAL: Hardened steel with a sh..
R 543.66
Ex VAT:R 472.75
Cat No: TCSS10014-2B
Stock: In Stock
Tork Craft Wire Cup Brush 100 x M14 Knotted Stainless Steel TCW
At a Glance: 100 mm knotted stainless steel cup brush with M14 thread for heavy-dut..
R 367.54
Ex VAT:R 319.60
Cat No: TCW CR7514-2B
Stock: In Stock
TorkCraft - Wire Cup Brush Crimped
Width: 75 mm
Thread Size: 14 mm
Application:
The Tork Craft TCW CR are cup shaped brushing too..
R 96.89
Ex VAT:R 84.25
Cat No: TCBP125C
Stock: In Stock
Backing pad
Rubber backing pad to be used with a drill
DIA: 125mm (5')
HOLES: No
ARBOR: &O/;6mm
Hook & Loop: No
Application:
This is a back..
R 83.09
Ex VAT:R 72.25
Cat No: TC RF06
Stock: In Stock
Tork Craft Rotary Rasp V-. — 4-24 mm (Cat No. TC RF06)
Packaging: Carded (for retail display)
This 4-24 mm V-. rotary rasp from Tork Craft gives y..
R 166.18
Ex VAT:R 144.50
Cat No: ABR37080
Stock: In Stock
Tork Craft Sanding Triangle — 80 Grit, 145 × 145 × 100 mm (5-Pack, Hook-and-Loop)
Step up from heavy removal to controlled shaping with the T..
R 27.37
Ex VAT:R 23.80