Cat No: TCPR23080LM
Stock: In Stock
Tork Craft TCT Saw Blade 230 × 80T 30/1/16mm TCG Positive
Heading: 230 mm diameter, 80 teeth, 30/1/16 mm bore — high-tooth fine-cut for large format ..
R 1,420.54
Ex VAT:R 1,235.25
Cat No: TCPR23540
Stock: In Stock
Tork Craft TCT Saw Blade 235 × 40T 30/25/16 mm ATB Positive
Heading: 235 mm diameter, 40 carbide-tipped teeth, multi-bore 30/25/16 mm for board and t..
R 950.48
Ex VAT:R 826.50
Cat No: TCPR23560
Stock: In Stock
Tork Craft TCT Saw Blade 235 × 60T 30/25/16mm ATB Positive
Heading: 235 mm diameter, 60 carbide-tipped teeth, multi-bore 30/25/16 mm for board & timb..
R 997.97
Ex VAT:R 867.80
Cat No: TCPR25040
Stock: In Stock
Tork Craft TCT Saw Blade 250 × 40T 30/1/20mm ATB Positive
Heading: 250 mm diameter, 40 carbide-tipped teeth, multi-bore 30/1/20 mm for structural tim..
R 874.86
Ex VAT:R 760.75
Cat No: TCPR25080AL
Stock: In Stock
Tork Craft TCT Saw Blade 250 × 80T 30mm Alum TCG Negative
Heading: 250 mm diameter, 80 teeth, 30 mm bore, negative hook TCG for aluminium and metal s..
R 1,521.22
Ex VAT:R 1,322.80
Cat No: TCPR25080LM
Stock: In Stock
Tork Craft TCT Saw Blade 250 × 80T 30/1/20mm TCG Positive
Heading: 250 mm diameter, 80 precision-ground teeth, 30/1/20 mm bore — engineered for high ..
R 1,491.38
Ex VAT:R 1,296.85
Cat No: TCPR30040
Stock: In Stock
Tork Craft TCT Saw Blade 300 × 40T 30/1/20mm ATB Positive
Heading: 300 mm diameter, 40 carbide-tipped teeth, multi-bore 30/1/20mm for large timber & ..
R 1,605.92
Ex VAT:R 1,396.45
Cat No: TCPR30060
Stock: In Stock
Tork Craft TCT Saw Blade 300 × 60T 30/1/20mm ATB Positive
Heading: 300 mm diameter, 60 carbide-tipped teeth, multi-bore 30/1/20 mm for wide-board and..
R 1,695.10
Ex VAT:R 1,474.00
Cat No: TCPR35030-30
Stock: In Stock
Tork Craft TCT Saw Blade 350 × 30T 30/1mm ATB Positive
Heading: 350 mm diameter, 30 carbide-tipped teeth, 30/1 mm bore for large board and timber cut..
R 1,679.81
Ex VAT:R 1,460.70
Cat No: TCPR35096-30
Stock: In Stock
Tork Craft TCT Saw Blade 350 × 96T 30/1 mm ATB Positive
Heading: 350 mm diameter, 96 carbide-tipped teeth, bore 30 mm (with reducing ring to 1 mm) — ..
R 2,297.24
Ex VAT:R 1,997.60
Cat No: TCPR40030-30
Stock: In Stock
Tork Craft TCT Saw Blade 400 × 30T 30/1mm ATB Positive
Heading: 400 mm diameter, 30 carbide-tipped teeth, 30/1 mm bore — built for large-format timbe..
R 1,780.55
Ex VAT:R 1,548.30
Cat No: TCPS3504
Stock: In Stock
Flange spanner
Application:
A flange spanner is used to remove the outer flange on an angle grinder to
replace or change the abrasive gr..
R 87.17
Ex VAT:R 75.80
Cat No: TCPS3505
Stock: In Stock
Flange spanner
A flange spanner is used to remove the outer flange on an angle grinder to
replace or change the abrasive grinding disc.
The ..
R 114.31
Ex VAT:R 99.40
Cat No: TCPS3506
Stock: In Stock
Adjustable Pin Spanner for Angle Grinder - 15-52 x 4mm
Pin Centers: 15 - 52mm
Too big - too small, adjust the fit. Tork Craft&s adjustable ..
R 134.27
Ex VAT:R 116.76
Cat No: TCPS3507
Stock: In Stock
Tork Craft Pin Spanner 35 × 4 mm Offset for Angle Grinders
Heading: 35 mm pin diameter × 4 mm pin thickness – offset design for angle grinder flange ..
R 94.67
Ex VAT:R 82.32
Cat No: TCPT012-01
Stock: In Stock
Tork Craft Pig Tail for Bench Grinders 12mm Left Hand
Heading: 12mm left-hand mounting accessory for bench grinders
The Tork Craft TCPT012-01 pi..
R 368.98
Ex VAT:R 320.85
Cat No: TCPT012-02
Stock: In Stock
Tork Craft Pig Tail for Bench Grinders 12mm Right Hand
Heading: 12 mm arbor fit, right-hand threaded pig tail for bench grinders
The Tork Craft ..
R 368.98
Ex VAT:R 320.85
Cat No: TCPT016-01
Stock: In Stock
Tork Craft Pig Tail for Bench Grinders 16mm Left Hand
Heading: 16 mm arbor fit, left-hand threaded pig tail for bench grinders
The Tork Craft TC..
R 416.88
Ex VAT:R 362.50
Cat No: TCPT016-02
Stock: In Stock
Tork Craft Pig Tail for Bench Grinders 16 mm Right Hand
Heading: 16 mm arbor fit, right-hand threaded pig tail accessory
The Tork Craft TCPT016-..
R 416.88
Ex VAT:R 362.50
Cat No: TCPU03100
Stock: In Stock
Tork Craft Centre Punch 3 × 10 × 100 mm (Black Finish)
Heading: 3 mm . × 10 mm diameter × 100 mm length—ideal for workshop marking and indenting
..
R 91.77
Ex VAT:R 79.80