- Stock: Out Of Stock
- Cat No: TCFD076-60
- SKU: TCFD076-60
- Barcode: 6009515918002
Available Options
Tork Craft Flap Sanding Disc 76mm x 10mm 60 Grit Flat
At a Glance: 76mm flat flap sanding disc with 60 grit aluminium oxide abrasive, fibreglass backing, 10mm arbour, 48 abrasive flaps and maximum speed of 20,000 RPM
The Tork Craft TCFD076-60 Flap Sanding Disc is a compact 76mm abrasive disc designed for grinding, sanding, blending and surface preparation applications. It uses aluminium oxide abrasive across 48 overlapping flaps supported by a fibreglass backing. The flat flap orientation is suited to working on flatter surfaces and edges, while the 60 grit provides a balance between material removal and surface refinement. A 10mm (25/64 inch) arbour provides mounting compatibility with suitable machines, and the disc is rated for a maximum operating speed of 20,000 RPM.
A flap sanding disc uses overlapping abrasive flaps arranged around a backing plate. As the exposed abrasive wears during use, fresh abrasive material is progressively presented, providing sustained cutting action. A flat flap configuration is particularly useful for working across flatter surfaces where controlled material removal and blending are required.
Product highlights
- 76mm diameter Compact disc size for controlled sanding and grinding applications.
- 60 grit abrasive Suitable for moderate stock removal, blending and surface preparation.
- Aluminium oxide abrasive Provides effective cutting action for general abrasive applications.
- 48 abrasive flaps Overlapping flap construction provides progressive abrasive exposure during use.
- Flat flap orientation Suited to flatter surfaces, edges and general blending work.
- Fibreglass backing Provides structural support for the abrasive flap assembly.
- 20,000 RPM maximum Suitable for compatible machines operating within the specified speed limit.
Features
- Aluminium oxide abrasive Provides dependable cutting and sanding performance.
- 60 grit grade Suitable for general sanding, blending and controlled material removal.
- 76mm disc diameter Provides a compact working area for controlled applications.
- 10mm arbour Equivalent to approximately 25/64 inch for compatible tool mounting.
- 48-flap construction Provides multiple overlapping abrasive surfaces.
- Flat configuration Supports controlled contact across flatter work surfaces.
- Fibreglass backing Supports the abrasive assembly during operation.
Benefits
- Balanced material removal: The 60 grit abrasive provides useful stock removal while producing a finer result than a coarser 40 grit disc.
- Progressive abrasive exposure: Overlapping flaps continually expose abrasive as the working surfaces wear.
- Controlled surface contact: The flat configuration is practical for working on flat surfaces and edges.
- Compact handling: The 76mm diameter is useful where a smaller sanding disc provides improved access and control.
- High-speed capability: The 20,000 RPM maximum rating accommodates suitable high-speed machines when used within specification.
Application
- General sanding and material removal
- Surface preparation
- Blending and smoothing
- Edge preparation
- Cleaning and preparing compatible work surfaces
- Workshop fabrication and maintenance
- General abrasive finishing applications
Extra Information
- Disc diameter: 76mm / 3 inch.
- Arbour size: 10mm / 25/64 inch.
- Abrasive material: Aluminium oxide.
- Backing material: Fibreglass.
- Grit: 60.
- Flap orientation: Flat.
- Number of flaps: 48.
- Maximum operating speed: 20,000 RPM.
- Never operate the disc above its stated maximum RPM.
Pro Tips
- Use light, controlled pressure and allow the abrasive to perform the cutting.
- Avoid holding the disc stationary in one area, as this may create uneven material removal.
- Keep the disc moving smoothly across the work surface for more consistent results.
- Check that the machine speed does not exceed 20,000 RPM before fitting the disc.
- For a finer final finish, progress to a higher-grit abrasive after the 60 grit stage.
How to Use
- Disconnect the machine from its power source before fitting the flap disc.
- Confirm that the machine is compatible with a 76mm disc and 10mm arbour.
- Check that the machine&s maximum operating speed does not exceed the disc&s 20,000 RPM rating.
- Inspect the flap disc for cracks, damaged flaps or backing damage before installation.
- Mount and secure the disc according to the machine manufacturer&s instructions.
- Secure the workpiece where necessary.
- Start the machine and allow it to reach operating speed before contacting the workpiece.
- Apply light, controlled pressure while moving the disc smoothly across the surface.
- Stop the machine and allow the disc to come to a complete stop before setting the tool down.
Safety
- Always wear suitable eye protection, hearing protection and respiratory protection for the material being worked.
- Wear suitable protective gloves and clothing where appropriate.
- Never exceed the maximum rated speed of 20,000 RPM.
- Confirm that the disc diameter and arbour size are compatible with the machine before installation.
- Inspect the disc before every use and do not use it if the backing or abrasive flaps are cracked, torn or damaged.
- Make sure the disc is securely mounted before starting the machine.
- Keep hands and loose clothing clear of the rotating disc.
- Secure the workpiece where necessary and maintain firm control of the machine.
- Allow the disc to come to a complete stop before setting the machine down.
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Cat No. | TCFD076-60 |
| Product Type | Flap Sanding Disc |
| Diameter | 76mm / 3 Inch |
| Arbour | 10mm / 25/64 Inch |
| Grit | 60 |
| Flap Orientation | Flat |
| Abrasive Material | Aluminium Oxide |
| Backing Material | Fibreglass |
| Number Of Flaps | 48 |
| Maximum RPM | 20,000 RPM |
| Application | Grinding, Sanding, Blending And Surface Preparation |
| Tool Type | Abrasive Flap Disc |
| Primary Use | General Material Removal, Blending And Surface Preparation |
In the box:
- 1 x Tork Craft Flap Sanding Disc 76mm x 10mm 60 Grit Flat