Cat No: TC08390
Stock: In Stock
Quick change collet kit
The quick change collet allows you to fit the following collet diameters:
&O/; 0.8mm
&O/; 1.6mm
&O/; 2.4mm
&O/;..
R 77.74
Ex VAT:R 67.60
Cat No: TC08391
Stock: In Stock
Replacement collet - &O/; 0.8mm
The collet is used to hold mini rotary accessories with a shank diameter of &O/; 0.8mm....
R 23.98
Ex VAT:R 20.85
Cat No: TC08392
Stock: In Stock
Replacement collet - &O/; 1.6mm
The collet is used to hold mini rotary accessories with a shank diameter of &O/; 1.6mm....
R 23.98
Ex VAT:R 20.85
Cat No: TC08393
Stock: In Stock
Replacement collet - &O/; 3.2mm
The collet is used to hold mini rotary accessories with a shank diameter of &O/; 3.2mm....
R 23.98
Ex VAT:R 20.85
Cat No: TC08394
Stock: In Stock
Multi chuck - &O/; 0.8mm - 3.2mm
The multi chuck is ideal for mini & micro drill bits, to secure hold different diameter accessories from &O/; ..
R 98.67
Ex VAT:R 85.80
Cat No: TC08395
Stock: In Stock
Collet wrench
The collet wrench is used to securely tighten the collet nut or multi chuck, locking the mini rotary accessory in place.
The b..
R 12.02
Ex VAT:R 10.45
Cat No: TCMT001DA
Stock: In Stock
MINI ROTARY TOOL ATTACHMENT FOR TCMT001 WITH DEPTH ADJUSTMENT TO 19MM....
R 81.82
Ex VAT:R 71.15
Cat No: TCMT001DC
Stock: In Stock
Chuck for TCMT001 rotary tool
Application:
The chuck is used to replace the collet clamping system of the TCMT001 rotary
tool. The clamping rang..
R 147.03
Ex VAT:R 127.85
Cat No: TCMT001FS
Stock: In Stock
Flexible shaft for TCMT001 rotary tool
Â
Application:
The flexible shaft is used to eliminate the weight from the rotary tool. It
is also mo....
R 300.90
Ex VAT:R 261.65
Cat No: TCMT001SS
Stock: In Stock
Telescopic st& for TCMT001 rotary tool
Â
Application:
The telescopic hanging hook st& is fitted to a desk clamp & it can be
adjusted in heig....
R 436.54
Ex VAT:R 379.60
Cat No: TCMT001-2-3-1
Stock: In Stock
Flexible shaft for TCMT001 rotary tool
Collet diameter: &O/;3.2mm
Application:
The collet is measured on the inside. There are three different co..
R 36.00
Ex VAT:R 31.30
Cat No: TCMT001-2-3-2
Stock: In Stock
Flexible shaft for TCMT001 rotary tool
Collet diameter: &O/;2.3mm
Application:
The collet is measured on the inside. There are three different co..
R 36.23
Ex VAT:R 31.50
Cat No: TCMT001-2-3-3
Stock: In Stock
Flexible shaft for TCMT001 rotary tool
Collet diameter: &O/;1.6mm
Application:
The collet is measured on the inside. There are three different co..
R 36.00
Ex VAT:R 31.30
Cat No: TCMT005-01
Stock: In Stock
REPLACEMENT TIP 3MM (2PC) FOR TORK CRAFT ELECTRIC ENGRAVER (TCMT005)....
R 64.29
Ex VAT:R 55.90
Showing 1 to 14 of 14 (1 Pages)