Cat No: TCSA40010B
Stock: In Stock
Tork Craft Scotch Eye Auger Bit 10mm x 400mm – Bulk
Highlights: 10mm diameter, 400mm length with Scotch eye loop handle for controlled manual drill..
R 277.15
Ex VAT:R 241.00
Cat No: TCSA40013B
Stock: In Stock
Tork Craft Scotch Eye Auger Bit 13mm x 400mm – Bulk
Highlights: 13mm diameter, 400mm shaft length, Scotch eye loop handle for manual drilling preci..
R 305.90
Ex VAT:R 266.00
Cat No: TCSA40016B
Stock: Out Of Stock
Tork Craft Scotch Eye Auger Bit 16mm x 400mm – Bulk
Highlights: 16 mm diameter, 400 mm length, Scotch eye loop handle for controlled manual drillin..
R 345.58
Ex VAT:R 300.50
Cat No: CMJT6-1
Stock: In Stock
Tork Craft Taper Adaptor — MT2 → JT6
This is a MT2 male to JT6 male taper adaptor for mounting JT6-type chucks onto machines or arbors with a..
R 132.25
Ex VAT:R 115.00
Cat No: DR90030
Stock: Out Of Stock
Tork Craft Precision-Max Step . Drill Set — 3.0 mm HSS (2-Piece)
Dial in neat, accurate holes with step-. geometry that starts true and resists ....
R 49.68
Ex VAT:R 43.20
Cat No: DR90055
Stock: In Stock
Tork Craft Precision-Max Step . Drill — 5.5 mm HSS (1 Piece)
Drill precise, clean holes with this 5.5 mm high-speed steel bit. Its step-. g....
R 69.46
Ex VAT:R 60.40
Cat No: DR90060
Stock: In Stock
Tork Craft Precision-Max Step . Drill — 6.0 mm HSS (1 Piece)
Drill precise, clean holes with this 6.0 mm high-speed steel bit. Its step-. g....
R 73.37
Ex VAT:R 63.80
Cat No: DR90065
Stock: In Stock
PRECISION-MAX STEP . 6.5MM HSS DRILL IND. 1PCE....
R 83.03
Ex VAT:R 72.20
Cat No: DR90080
Stock: In Stock
Tork Craft Precision-Max Step . Drill — 8.0 mm HSS (1 Piece)
This 8.0 mm high-speed steel (HSS) precision drill bit features a step-. tip for superio..
R 137.43
Ex VAT:R 119.50
Cat No: TCAC018-3
Stock: In Stock
Tork Craft Annular Hole Cutter — TCT 18 × 35 mm, 19.05 mm (3/4") Weldon
Size: 18 mm x 35 mm [3/4" Weldon Shank]
The Tork Craft 1....
R 871.70
Ex VAT:R 758.00
Cat No: TCAC022-4
Stock: In Stock
Tork Craft Annular Hole Cutter — TCT 22 × 55 mm, 19.05 mm (3/4") Weldon
Size: 22 mm x 55 mm [3/4" Weldon Shank]
The 22 ....
R 986.70
Ex VAT:R 858.00
Cat No: TCAC026-4
Stock: In Stock
Tork Craft Annular Hole Cutter — TCT 26 × 55 mm, 19.05 mm (3/4") Weldon
Size: 26 mm x 55 mm [3/4" Weldon Shank]
The 26 mm TC....
R 1,038.45
Ex VAT:R 903.00
Cat No: TCAC030-4
Stock: In Stock
Tork Craft Annular Hole Cutter — TCT 30 × 55 mm, 19.05 mm (3/4") Weldon
Size: 30 mm x 55 mm [3/4" Weldon Shank]
The 30 mm diamete....
R 1,038.45
Ex VAT:R 903.00
Cat No: TCAC060-2
Stock: In Stock
Tork Craft Annular Hole Cutter — HSS 60 × 55 mm, 19.05 mm (3/4") Weldon Shank
Size: 60 mm x 55 mm [3/4" Weldon Shank]
This 60 mm ....
R 3,335.58
Ex VAT:R 2,900.50
Cat No: TCAC064-1
Stock: Out Of Stock
Tork Craft Annular Hole Cutter — HSS 64 × 30 mm, 19.05 mm (3/4") Weldon
Size: 64 mm x 30 mm [3/4" Weldon Shank]
This 64 mm diameter H....
R 2,917.55
Ex VAT:R 2,537.00
Cat No: TCAC075-3
Stock: In Stock
Tork Craft Annular Hole Cutter — TCT 75 × 30 mm, 31.75 mm (1¼″) Weldon
Size: 75 mm x 30 mm [1¼″ Weldon Shank]
This 75 mm diameter TCT annu....
R 3,105.58
Ex VAT:R 2,700.50
Cat No: TCAC095-3
Stock: In Stock
Tork Craft Annular Hole Cutter — TCT 95 × 30 mm, 31.75 mm (1¼″) Weldon
Size: 95 mm x 30 mm [1¼″ Weldon Shank]
This 95 mm diameter TCT annu....
R 4,593.10
Ex VAT:R 3,994.00
Cat No: TCAC095-4
Stock: In Stock
Tork Craft Annular Hole Cutter — TCT 95 × 55 mm, 31.75 mm (1¼″) Weldon
Size: 95 mm x 55 mm [1¼″ Weldon Shank]
This 95 mm diameter TCT annu....
R 5,310.13
Ex VAT:R 4,617.50
Cat No: CM19
Stock: In Stock
Tork Craft Chuck & Key — 1.0–19 mm (JT4 Taper Mount)
The Tork Craft 19 mm keyed drill chuck offers heavy-duty clamping for indu....
R 699.20
Ex VAT:R 608.00
Cat No: CMJT4-1
Stock: In Stock
Tork Craft Taper Adapter — MT2 to JT4 (Morse → Jacobs)
Adapt MT2 (Morse Taper #2) spindles/arbors to accept JT4 (Jacobs Taper #4) drill chuck..
R 144.90
Ex VAT:R 126.00