Cat No: CMMT2-1
Stock: In Stock
MORSE TAPER SLEEVE MT2 - MT1....
R 148.70
Ex VAT:R 129.30
Cat No: CMMT3
Stock: In Stock
MT3 - B16 arbor
Drill
chuck morse taper holder for the adaption of a drill chuck for your drill or mill.
Simply fit the drill chuck onto the ..
R 118.22
Ex VAT:R 102.80
Cat No: CMMT3-2
Stock: In Stock
MORSE TAPER SLEEVE MT3 - MT2....
R 141.22
Ex VAT:R 122.80
Cat No: CMMT3-3
Stock: In Stock
TAPER ADAPTOR MT3 - B22....
R 126.50
Ex VAT:R 110.00
Cat No: TC17900
Stock: In Stock
Adapter: SDS-Plus to Drill Chuck
Adapt a drill chuck to a SDS-Plus rotary hammer
Most rotary hammer drills have the option of switching the hamm..
R 40.14
Ex VAT:R 34.90
Cat No: TC317888
Stock: In Stock
Adapter: SDS-Max to SDS-Plus
SDS-Max to SDS-Plus adapter
In some cases you might need to use a SDS-Plus drill bit & do not have the machine
to..
R 424.98
Ex VAT:R 369.55
Cat No: TCAD01
Stock: In Stock
Angle drive with 10mm chuck
Use the angle drive with your drill to reach in places you never could before.
Max chuck capacity: &O/;10mm
Angle: ..
R 773.55
Ex VAT:R 672.65
Cat No: TCAD02
Stock: In Stock
Angle Drive with Ratchet
An angle drive attachment is a tool that allows you to drill or drive screws at an angle. It's essentially a
right-..
R 577.67
Ex VAT:R 502.32
Cat No: TCV04043-1
Stock: In Stock
MULTI ANGLE PRECISION DRILL GUIDE WITH 10MM CHUCK....
R 1,079.16
Ex VAT:R 938.40
Cat No: TCMD004
Stock: In Stock
DRIFT KEY 1-2....
R 105.40
Ex VAT:R 91.65
Cat No: TCMD005
Stock: In Stock
SAFETY PROTECTION LANYARD FOR MAG BASE DRILLS....
R 71.30
Ex VAT:R 62.00
Cat No: CM01
Stock: In Stock
Chuck key
Fits 10mm (3/8 inch) chucks
10mm
Replacement key for our Tork Craft chucks. This chuck key will fit our range of
10mm chucks.
..
R 22.54
Ex VAT:R 19.60
Cat No: CM02
Stock: In Stock
Chuck key
Fits 13mm (1/2 inch) chucks
13mm
Replacement key for our Tork Craft drill chucks. This chuck key will fit our range of
13mm chuc..
R 24.09
Ex VAT:R 20.95
Cat No: CM04
Stock: In Stock
Chuck key
Fits 16mm (5/8 inch) chucks
16mm
Replacement key for our Tork Craft drill chucks. This chuck key will fit our range of
16mm chuc..
R 31.74
Ex VAT:R 27.60
Cat No: CM10
Stock: In Stock
Drill Chuck with Key
Chuck Capacity: 1 - 10mm
A drill chuck with key is a device used to secure drill bits into power drills & oth..
R 127.19
Ex VAT:R 110.60
In Stock Soon
Cat No: CM10-2
Stock: In Stock Soon
10mm Keyless Drill Chuck
10mm
(3/8') keyless drill chuck, 24 UNF thread. Replacement drill chuck for use in most
small electric & cordless dri..
R 222.24
Ex VAT:R 193.25
New Expected Date :
- 15/05/2025
Cat No: CM113
Stock: In Stock
13mm Drill Chuck with key
& SDS-Plus adapter
Ultra replacement 13mm (1/2') keyed chuck, 20
UNF thread. Replacement drill chuck
f....
R 135.99
Ex VAT:R 118.25
Cat No: CM13
Stock: In Stock
Drill Chuck with Key
Chuck Capacity: 1.5mm to 13mm
A drill chuck with key is a device used to secure drill bits into power drills ..
R 107.81
Ex VAT:R 93.75
Cat No: CM13-1
Stock: In Stock
Drill Chuck with Key
Chuck Capacity: 1 - 13mm
Mount size: B16 Taper
A drill chuck with a B16 taper is a tool used to hold & secu..
R 303.08
Ex VAT:R 263.55
Cat No: CM13-2
Stock: In Stock
13mm Keyless Drill Chuck
Budget replacement 13mm (1/2') keyless
drill chuck, 20 UNF thread. Replacement drill chuck for use in most smal..
R 182.45
Ex VAT:R 158.65