- Stock: In Stock
- Cat No: DR80180
- Weight: 0.19kg
- Dimensions: 210 mm x 45 mm x 18 mm
- SKU: DR80180
- Barcode: 6009515823092
Available Options
Tork Craft Masonry & Concrete Drill Bit 18.0mm x 210mm
At a Glance: 18.0mm masonry drill bit with a YG8C tungsten carbide tip, fully ground flute and round shank. Overall length: 210mm. Supplied as 1 drill bit per card.
Take on masonry drilling with the Tork Craft DR80180, an 18.0mm drill bit designed for concrete, masonry, stone, brick and block. Its YG8C tungsten carbide tip provides a tough cutting point, while the fully ground flute helps carry drilled material out of the hole. Manufactured with a #45 carbon steel flute and shank, this bit is a practical addition to your toolkit for construction, manufacturing, maintenance and DIY projects. The round shank secures in a compatible drill chuck for use with corded or cordless hammer drills.
The carbide tip is designed to maximise surface contact and provide added strength for longer bit life. Its 130° tip angle works alongside the efficient flute design to support drilling into suitable masonry materials and extract debris from the hole.
Product Highlights
- 18.0mm drilling diameter: Suitable for applications requiring an 18.0mm hole in masonry materials.
- YG8C tungsten carbide tip: Provides a durable cutting point for concrete, brick, stone and block.
- Fully ground flute: Helps extract drilled material as the hole progresses.
- Carbon steel construction: #45 carbon steel flute and shank support the carbide cutting tip.
- Round shank: Fits a compatible drill chuck for straightforward installation.
Compatibility
- Drills: Compatible corded and cordless hammer drills with a chuck capable of securely gripping the round shank. Check the drill&s permitted masonry drilling capacity before use.
- Materials: Masonry, concrete, stone, brick and block.
Extra Information
- The 210mm measurement is the overall drill bit length, not a specified usable drilling depth.
- The cutting diameter does not confirm the shank diameter. Check that your drill chuck can securely accommodate the shank.
- Select the drilling speed and operating mode to suit the bit diameter, material and drill manufacturer&s instructions.
- When drilling for a fixing, follow the fixing manufacturer&s specified hole diameter and depth.
Pro Tips
- Keep the drill aligned with the hole and apply controlled pressure to avoid bending or side-loading the bit.
- Clear accumulated drilling debris regularly and use suitable dust extraction where possible.
- Allow the bit to cool between demanding drilling operations.
How to Use
- Check the drilling area for concealed services and mark the required hole position.
- Inspect the bit to ensure it is clean, straight and undamaged.
- With the drill disconnected from its power source, insert the round shank into a compatible chuck and tighten securely.
- Select the appropriate drilling speed and operating mode for the material, following the drill manufacturer&s instructions.
- Align the bit with the mark and drill with steady, controlled pressure.
- Clear debris as required and use suitable dust extraction where possible.
- Stop at the required depth, withdraw the bit carefully and allow it to cool before handling or storing.
Features
- 18.0mm diameter: Clearly defined size for selecting the correct bit for the job.
- Tungsten carbide tip: YG8C carbide provides cutting strength for masonry applications.
- 130° tip angle: Manufactured with a tip angle tolerance of ±2°.
- Fully ground flute: Designed for efficient removal of drilled material.
- 210mm overall length: Supplied with a round shank.
Benefits
- Durable cutting performance: The carbide tip provides added strength to support longer bit life.
- Efficient debris removal: The flute helps carry drilling debris away from the cutting area.
- Versatile masonry use: Suitable for several common building materials.
- Convenient individual replacement: Add the required 18.0mm size to your drilling accessories without purchasing a complete set.
Application
- Drilling 18.0mm holes in concrete and masonry.
- Drilling into suitable stone, brick and block.
- Construction and installation tasks requiring an 18.0mm masonry hole.
- Manufacturing, maintenance and general DIY projects.
Safety
- Wear eye, ear and suitable dust protection when drilling.
- Use suitable dust extraction where possible to reduce airborne drilling dust.
- Ensure the bit is correctly aligned and securely tightened in the chuck before starting.
- Inspect the bit before use and replace it if bent, cracked or otherwise damaged.
- Check for concealed electrical cables, pipes and other services before drilling.
- Disconnect the drill from its power source before fitting or removing the bit.
- Allow the cutting tip to cool before touching it after drilling.
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Cat No. | DR80180 |
| Product Type | Masonry and concrete drill bit |
| Barcode | 6009515823092 |
| Drill Bit Diameter | 18.0mm |
| Overall Length | 210mm |
| Shank Type | Round |
| Flute and Shank Material | #45 carbon steel |
| Tip Material | YG8C tungsten carbide |
| Flute Manufacturing | Fully ground |
| Tip Angle | 130° ±2° |
| Recommended Tool | Hammer drill; compatible corded or cordless impact drill |
| Suitable Materials | Masonry, concrete, stone, brick and block |
| Quantity | 1 drill bit per card |
| Packaging Type | Sandwich blister card |
In the Box / Packaging
- 1 x Tork Craft DR80180 masonry drill bit, 18.0mm x 210mm.
- Supplied on a sandwich blister card.