- Stock: In Stock
- Cat No: DR83200
- Weight: 0.60kg
- Dimensions: 48.5 mm x 5 mm x 2.5 mm
- SKU: DR83200
- Barcode: 6009515837082
Available Options
Tork Craft Long Masonry & Concrete Drill Bit 20.0mm x 400mm
At a Glance: 20.0mm masonry drill bit with a 400mm overall length, YG8C tungsten carbide tip, fully ground flute and round shank. Supplied as 1 drill bit per card.
Extend your drilling reach with the Tork Craft DR83200, a 20.0mm masonry drill bit with a 400mm overall length. Designed for concrete, masonry, stone, brick and block, this long drill bit is a practical choice when your application requires a longer bit than a standard-length option. Its YG8C tungsten carbide tip provides a tough cutting point, while the fully ground flute helps carry drilled material out of the hole. The #45 carbon steel flute and shank support the carbide tip, and the round shank secures in a compatible drill chuck for use with corded or cordless hammer drills.
The 400mm overall length provides additional reach for suitable masonry drilling tasks. A tungsten carbide tip designed to maximise surface contact and provide added strength works alongside the efficient flute design to support longer bit life and debris extraction.
Product Highlights
- 20.0mm drilling diameter: Suitable for applications requiring a 20.0mm hole in masonry materials.
- 400mm overall length: A long drill bit for tasks requiring additional reach.
- YG8C tungsten carbide tip: Provides a durable cutting point for concrete, brick, stone and block.
- Fully ground flute: Helps extract drilled material as the hole progresses.
- Round shank: Fits a compatible drill chuck for straightforward installation.
Compatibility
- Drills: Compatible corded and cordless hammer drills with a chuck capable of securely gripping the round shank. Check the drill&s permitted masonry drilling capacity and guidance for long drill bits before use.
- Materials: Masonry, concrete, stone, brick and block.
Extra Information
- The 400mm measurement is the overall drill bit length, not a specified usable drilling depth.
- Allow for the portion held inside the chuck and the available flute length when assessing suitability for your required hole depth.
- The cutting diameter does not confirm the shank diameter. Check that your drill chuck can securely accommodate the shank.
- Select the drilling speed and operating mode to suit the bit diameter, length, material and drill manufacturer&s instructions.
- When drilling for a fixing, follow the fixing manufacturer&s specified hole diameter and depth.
Pro Tips
- Keep the long bit aligned with the hole and avoid sideways pressure, which can bend or damage it.
- Clear accumulated drilling debris regularly, particularly as the hole becomes deeper.
- Use suitable dust extraction where possible and allow the bit to cool between demanding drilling operations.
How to Use
- Check the drilling area for concealed services and mark the required hole position.
- Inspect the bit to ensure it is clean, straight and undamaged.
- With the drill disconnected from its power source, insert the round shank into a compatible chuck and tighten securely.
- Select the appropriate speed and operating mode, following the drill manufacturer&s instructions for the material and long drill bits.
- Align the bit with the mark and begin drilling carefully, keeping the drill steady and avoiding sideways pressure.
- Advance with controlled pressure, clearing debris regularly and using suitable dust extraction where possible.
- Stop at the required depth, withdraw the bit carefully and allow it to cool before handling or storing.
Features
- 20.0mm diameter: Clearly defined size for selecting the correct bit for the job.
- 400mm overall length: Long format for applications requiring extended reach.
- Tungsten carbide tip: YG8C carbide provides cutting strength for masonry applications.
- 130° tip angle: Manufactured with a tip angle tolerance of ±2°.
- Fully ground flute: Designed for efficient removal of drilled material.
- Carbon steel construction: #45 carbon steel flute and shank.
Benefits
- Additional reach: Provides a longer option for suitable drilling tasks where standard-length bits are insufficient.
- Durable cutting performance: The carbide tip provides added strength to support longer bit life.
- Efficient debris removal: The flute helps carry drilling debris away from the cutting area.
- Versatile masonry use: Suitable for several common building materials.
Application
- Drilling 20.0mm holes in concrete and masonry.
- Drilling into suitable stone, brick and block.
- Installation and construction tasks requiring a longer masonry drill bit.
- Manufacturing, maintenance and DIY projects requiring additional drilling reach.
Safety
- Wear eye, ear and suitable dust protection when drilling.
- Use suitable dust extraction where possible to reduce airborne drilling dust.
- Ensure the bit is correctly aligned and securely tightened in the chuck before starting.
- Inspect the bit before use and replace it if bent, cracked or otherwise damaged.
- Check for concealed electrical cables, pipes and other services along the intended drilling path.
- Avoid bending or side-loading the long bit during use.
- Disconnect the drill from its power source before fitting or removing the bit.
- Allow the cutting tip to cool before touching it after drilling.
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Cat No. | DR83200 |
| Product Type | Long masonry and concrete drill bit |
| Barcode | 6009515837082 |
| Drill Bit Diameter | 20.0mm |
| Overall Length | 400mm |
| Shank Type | Round |
| Flute and Shank Material | #45 carbon steel |
| Tip Material | YG8C tungsten carbide |
| Flute Manufacturing | Fully ground |
| Tip Angle | 130° ±2° |
| Recommended Tool | Hammer drill; compatible corded or cordless impact drill |
| Suitable Materials | Masonry, concrete, stone, brick and block |
| Quantity | 1 drill bit per card |
| Packaging Type | Sandwich blister card |
In the Box / Packaging
- 1 x Tork Craft DR83200 long masonry drill bit, 20.0mm x 400mm.
- Supplied on a sandwich blister card.