Imp. Drill Tcid1100 + Nr00013 Combo Drill Set

Extra Information

• Bit care: keep bits sharp and cool (use cutting fluid on metals) to extend life.
• Masonry tip: engage hammer mode only with masonry bits; let the tool do the work.
• Pilot holes: step up through sizes in harder materials for cleaner holes.
• Storage: return bits to the labeled slots to avoid mix-ups and damage.

Features

• TCID1100 Impact Drill: 1100 W motor with 2-speed gearbox for material-matched control (typical ranges 0–1200 / 0–3000 rpm).
• Hammer / drill modes for switching between masonry and standard drilling.
• 13 mm keyed metal chuck—durable grip on bits for high-torque work.
• NR00013 Drill Set (13-pc): roll-forged HSS, 118° point; sizes 1.5–6.5 mm in a metal case.
• Compact kit case with organized storage for tool and bits.

Benefits

• Ready to work: drill + bit set means fewer trips back to the store.
• Right speed, better results: 2-speed gearbox improves finish and bit life.
• Wide material coverage: wood, steel and light masonry with the correct bit.
• Long-lasting bits: roll-forged HSS can be re-sharpened multiple times.
• Neat storage: kit packs away cleanly for transport and site work.

Safety

• Wear eye/face and hearing protection; use a dust mask for masonry.
• Secure the workpiece with clamps; keep hands clear of the bit path.
• Select the correct bit type (HSS for metal/wood; masonry bit for hammer mode).
• Let the bit cut—do not force the tool; reduce speed on larger diameters.
• Disconnect power before changing bits or making adjustments.

Specifications