Menu
Your Cart

Tork Craft Long Masonry & Concrete Drill Bit 12.0mm x 400mm 1/Card DR83120

Tork Craft Long Masonry & Concrete Drill Bit 12.0mm x 400mm 1/Card DR83120
Tork Craft Long Masonry & Concrete Drill Bit 12.0mm x 400mm 1/Card DR83120
Tork Craft Long Masonry & Concrete Drill Bit 12.0mm x 400mm 1/Card DR83120
Tork Craft Long Masonry & Concrete Drill Bit 12.0mm x 400mm 1/Card DR83120
Tork Craft Long Masonry & Concrete Drill Bit 12.0mm x 400mm 1/Card DR83120
Price
R 132.25
Ex VAT: R 115.00
  • Stock: In Stock
  • Cat No: DR83120
  • Weight: 0.20kg
  • Dimensions: 48.5 mm x 5 mm x 1.5 mm
  • SKU: DR83120
  • Barcode: 6009515837068

Available Options

Tork Craft Long Masonry & Concrete Drill Bit 12.0mm x 400mm

At a Glance: 12.0mm masonry drill bit with a 400mm overall length, YG8C tungsten carbide tip, fully ground flute and round shank. Supplied as 1 drill bit per card.

Extend your drilling reach with the Tork Craft DR83120, a 12.0mm masonry drill bit with a 400mm overall length. Designed for concrete, masonry, stone, brick and block, this long drill bit is a practical choice when your application requires a longer bit than a standard-length option. Its YG8C tungsten carbide tip provides a tough cutting point, while the fully ground flute helps carry drilled material out of the hole. The #45 carbon steel flute and shank support the carbide tip, and the round shank secures in a compatible drill chuck for use with corded or cordless hammer drills.

Extended reach with tungsten carbide cutting strength

The 400mm overall length provides additional reach for suitable masonry drilling tasks. A tungsten carbide tip designed to maximise surface contact and provide added strength works alongside the efficient flute design to support longer bit life and debris extraction.

Product Highlights

  • 12.0mm drilling diameter: Suitable for applications requiring a 12.0mm hole in masonry materials.
  • 400mm overall length: A long drill bit for tasks requiring additional reach.
  • YG8C tungsten carbide tip: Provides a durable cutting point for concrete, brick, stone and block.
  • Fully ground flute: Helps extract drilled material as the hole progresses.
  • Round shank: Fits a compatible drill chuck for straightforward installation.

Compatibility

  • Drills: Compatible corded and cordless hammer drills with a chuck capable of securely gripping the round shank. Follow the drill manufacturer&s guidance for long drill bits.
  • Materials: Masonry, concrete, stone, brick and block.

Extra Information

  • The 400mm measurement is the overall drill bit length, not a specified usable drilling depth.
  • Allow for the portion held inside the chuck and the available flute length when assessing suitability for your required hole depth.
  • Select the drilling speed and operating mode to suit the bit diameter, length, material and drill manufacturer&s instructions.
  • When drilling for a fixing, follow the fixing manufacturer&s specified hole diameter and depth.

Pro Tips

  • Keep the long bit aligned with the hole and avoid sideways pressure, which can bend or damage it.
  • Clear accumulated drilling debris regularly, particularly as the hole becomes deeper.
  • Use suitable dust extraction where possible and allow the bit to cool between demanding drilling operations.

How to Use

  • Check the drilling area for concealed services and mark the required hole position.
  • Inspect the bit to ensure it is clean, straight and undamaged.
  • With the drill disconnected from its power source, insert the round shank into a compatible chuck and tighten securely.
  • Select the appropriate speed and operating mode, following the drill manufacturer&s instructions for the material and long drill bits.
  • Align the bit with the mark and begin drilling carefully, keeping the drill steady and avoiding sideways pressure.
  • Advance with controlled pressure, clearing debris regularly and using suitable dust extraction where possible.
  • Stop at the required depth, withdraw the bit carefully and allow it to cool before handling or storing.

Features

  • 12.0mm diameter: Clearly defined size for selecting the correct bit for the job.
  • 400mm overall length: Long format for applications requiring extended reach.
  • Tungsten carbide tip: YG8C carbide provides cutting strength for masonry applications.
  • 130° tip angle: Manufactured with a tip angle tolerance of ±2°.
  • Fully ground flute: Designed for efficient removal of drilled material.
  • Carbon steel construction: #45 carbon steel flute and shank.

Benefits

  • Additional reach: Provides a longer option for suitable drilling tasks where standard-length bits are insufficient.
  • Durable cutting performance: The carbide tip provides added strength to support longer bit life.
  • Efficient debris removal: The flute helps carry drilling debris away from the cutting area.
  • Versatile masonry use: Suitable for several common building materials.

Application

  • Drilling 12.0mm holes in concrete and masonry.
  • Drilling into suitable stone, brick and block.
  • Installation and construction tasks requiring a longer masonry drill bit.
  • Manufacturing, maintenance and DIY projects requiring additional drilling reach.

Safety

  • Wear eye, ear and suitable dust protection when drilling.
  • Use suitable dust extraction where possible to reduce airborne drilling dust.
  • Ensure the bit is correctly aligned and securely tightened in the chuck before starting.
  • Inspect the bit before use and replace it if bent, cracked or otherwise damaged.
  • Check for concealed electrical cables, pipes and other services along the intended drilling path.
  • Avoid bending or side-loading the long bit during use.
  • Disconnect the drill from its power source before fitting or removing the bit.
  • Allow the cutting tip to cool before touching it after drilling.

Specifications

DescriptionSpec
BrandTork Craft
Cat No.DR83120
Product TypeLong masonry and concrete drill bit
Barcode6009515837068
Drill Bit Diameter12.0mm
Overall Length400mm
Shank TypeRound
Flute and Shank Material#45 carbon steel
Tip MaterialYG8C tungsten carbide
Flute ManufacturingFully ground
Tip Angle130° ±2°
Recommended ToolHammer drill; compatible corded or cordless impact drill
Suitable MaterialsMasonry, concrete, stone, brick and block
Quantity1 drill bit per card
Packaging TypeSandwich blister card

In the Box / Packaging

  • 1 x Tork Craft DR83120 long masonry drill bit, 12.0mm x 400mm.
  • Supplied on a sandwich blister card.